72 teeth coarse corrugated ceramic cutting blade

The 72‑Teeth Coarse Corrugated‑Tooth Ceramic Cutting Blade is a cutting tool made for ceramic materials. Its special 72‑teeth coarse corrugated‑tooth structure brings great cutting performance and long service life. Below is the full product introduction.

The 72‑tooth structure creates more contact points on the cutting surface. It makes cutting smoother and more even.

Coarse corrugated teeth spread heat and stress better while you cut. They lower cutting resistance and improve working speed.

This special design also reduces vibration and noise during cutting. It helps you get flatter cut surfaces.

We make this blade with high‑grade diamond or hard alloy material. These materials have very high hardness and strong wear resistance.

Good raw materials help the blade keep sharp edges for a long time. They extend the blade’s service life.

This 72‑teeth coarse corrugated‑tooth ceramic cutting blade cuts many ceramic materials quickly, such as ceramic tiles, glass tiles and marble.

It keeps a steady cutting speed. You will get smooth and even cut surfaces, so you do not need much extra finishing work.

We run strict safety tests on every blade to keep users safe during operation.

You will find clear safety instructions inside the product package. The instructions remind you of important safety rules while working.

The 72‑Teeth Coarse Corrugated‑Tooth Ceramic Cutting Blade works widely in building, decoration and home‑use scenes.

In the building industry, workers often use it to cut tiles and marble for different decoration projects.

For home use, you can cut ceramic tableware, ceramic art pieces and other ceramic products.

This blade measures 105 mm in diameter. Its size is close to the common 110 mm blade. We also recommend our red‑colored 110 mm 72‑teeth corrugated‑tooth ceramic cutting blade.

Pick a proper cutting machine according to the blade’s size and model. Make sure the machine’s power and speed match the blade.

Check the blade often in use. Replace it right away when it wears too much. A heavily worn blade gives poor cutting results and brings safety risks. Do not use worn‑out blades.

Adjust machine speed and cutting pressure based on your ceramic material’s type and thickness. Too high speed or heavy pressure will create uneven cuts or damage the blade.

Put on safety glasses, masks and gloves when you cut. These items protect your eyes, skin and breathing system from dust and sharp chips.

Clean ceramic pieces and dust off the blade after each use. Dirty waste will hurt cutting performance and shorten blade life.

Keep the blade in a dry and well‑ventilated place. Stay away from wet air to avoid rust.

Check blade wear condition frequently. Replace the blade immediately once it becomes badly worn.

To sum up, the 72‑Teeth Coarse Corrugated‑Tooth Ceramic Cutting Blade serves building, decoration and home‑use fields well. It relies on its unique tooth structure, good raw materials, fast cutting ability and reliable safety. Always select a matched cutting machine, keep the blade sharp, control speed and pressure, and wear protective gear. Do regular cleaning, dry storage and inspection. These steps help you get good cutting results and make the blade last longer.